36308 Federal Register / Vol. 85, No. 116 / Tuesday, June 16, 2020 / Rules and Regulations revising the TN Americas LLC and order copies of public documents, without incorporation of the change. NUHOMS® EOS Dry Spent Fuel Storage is currently closed. You may submit Therefore, the direct final rule will System listing within the ‘‘List of your request to the PDR via email at become effective as scheduled. approved spent fuel storage casks’’ to PDR.Resource@nrc.gov or call 1–800– Dated: May 26, 2020. include Amendment No. 1 to Certificate 397–4209 between 8:00 a.m. and 4:00 For the Nuclear Regulatory Commission. of Compliance No. 1042. Amendment p.m. (EST), Monday through Friday, Cindy K. Bladey, No. 1 makes the following changes: except Federal holidays. Adds a new basket type (Type 4) to Chief, Regulatory Analysis and Rulemaking FOR FURTHER INFORMATION CONTACT: Support Branch, Division of Rulemaking, allow for the loading of intact, damaged, Christian Jacobs, Office of Nuclear Environmental, and Financial Support, Office or failed fuel; adds another new basket Material Safety and Safeguards; of Nuclear Material Safety and Safeguards. type (Type 5); accepts fuel assemblies telephone: 301–415–6825; email: [FR Doc. 2020–11691 Filed 6–15–20; 8:45 am] with a minimum two-year cooling time, Christian.Jacobs@nrc.gov or Nicole BILLING CODE 7590–01–P in selected locations within the basket; Fields, Office of Nuclear Material Safety and adds the NUHOMS® MATRIX and Safeguards, telephone: 630–829– design as an alternative to the EOS 9570; email: Nichole.Fields@nrc.gov. horizontal storage module design for the Both are staff of the U.S. Nuclear SMALL BUSINESS ADMINISTRATION storage of spent fuel. Amendment No. 1 Regulatory Commission, Washington, 13 CFR Part 120 also makes other additional revisions to DC 20555–0001. the certificate of compliance and the SUPPLEMENTARY INFORMATION: On April [Docket No. SBA–2020–0035] technical specifications for consistency 3, 2020 (85 FR 18857), the NRC and clarity. RIN 3245–AH49 published a direct final rule amending DATES: its regulations in part 72 of title 10 of Business Loan Program Temporary Effective date: The effective date of the Code of Federal Regulations by Changes; Paycheck Protection June 17, 2020, for the direct final rule revising the TN Americas LLC Program—Revisions to First Interim published April 3, 2020 (85 FR 18857), NUHOMS® EOS Dry Spent Fuel Storage Final Rule is confirmed. System listing within the ‘‘List of ADDRESSES: Please refer to Docket ID approved spent fuel storage casks’’ to AGENCY: U.S. Small Business NRC–2019–0224 when contacting the include Amendment No. 1 to Certificate Administration. NRC about the availability of of Compliance No. 1042. Amendment ACTION: Interim final rule. information for this action. You may No. 1 makes the following changes: obtain publicly-available information Adds a new basket type (Type 4) to SUMMARY: On April 2, 2020, the U.S. related to this action by any of the allow for the loading of intact, damaged, Small Business Administration (SBA) following methods: or failed fuel; adds another new basket posted on its website an interim final • Federal Rulemaking Website: Go to type (Type 5); accepts fuel assemblies rule relating to the implementation of https://www.regulations.gov and search with a minimum two-year cooling time, sections 1102 and 1106 of the for Docket ID NRC–2019–0224. Address in selected locations within the basket; Coronavirus Aid, Relief, and Economic questions about NRC dockets to Carol and adds the NUHOMS® MATRIX Security Act (CARES Act or the Act) Gallagher; telephone: 301–415–3463; design as an alternative to the EOS (published in the Federal Register on email: Carol.Gallagher@nrc.gov. For horizontal storage module design for the April 15, 2020). Section 1102 of the Act technical questions, contact the storage of spent fuel. Amendment No. 1 temporarily adds a new product, titled individuals listed in the FOR FURTHER also makes other additional revisions to the ‘‘Paycheck Protection Program,’’ to INFORMATION CONTACT section of this the certificate of compliance and the the U.S. Small Business document. technical specifications for consistency Administration’s (SBA’s) 7(a) Loan • NRC’s Agencywide Documents and clarity. Program. Subsequently, SBA issued a Access and Management System In the direct final rule published on number of interim final rules (ADAMS): You may obtain publicly- April 3, 2020, the NRC stated that if no implementing the Paycheck Protection available documents online in the significant adverse comments were Program. On June 5, 2020, the Paycheck ADAMS Public Documents collection at received, the direct final rule would Protection Program Flexibility Act of https://www.nrc.gov/reading-rm/ become effective on June 17, 2020. The 2020 (Flexibility Act) was signed into adams.html. To begin the search, select NRC received and docketed two law, amending the CARES Act. This ‘‘Begin Web-based ADAMS Search.’’ For comments on the companion proposed interim final rule revises SBA’s interim problems with ADAMS, please contact rule (85 FR 18876; April 3, 2020). final rule published in the Federal the NRC’s Public Document Room (PDR) Electronic copies of these comments can Register on April 15, 2020, by changing reference staff at 1–800–397–4209, 301– be obtained from the Federal key provisions, such as the loan 415–4737, or by email to pdr.resource@ Rulemaking website https:// maturity, deferral of loan payments, and nrc.gov. The proposed amendment to www.regulations.gov under Docket ID forgiveness provisions, to conform to the certificate, the proposed changes to NRC–2019–0224, and are also available the Flexibility Act. SBA also is making the technical specifications, and in ADAMS under Accession Nos. conforming amendments to the use of preliminary safety evaluation report are ML20118C707 and ML20126G364. PPP loan proceeds for consistency with available in ADAMS under Accession The NRC evaluated the comments amendments made in the Flexibility No. ML19290H600. The final against the criteria described in the Act. Several of these amendments are amendment to the certificate, final direct final rule and determined that retroactive to the date of enactment of the CARES Act, as required by section lotter on DSK30NT082PROD with RULES changes to the technical specifications, they were not significant and adverse. and final safety evaluation report can Specifically, the comments were outside 3(d) of the Flexibility Act. also be viewed in ADAMS under the scope of this rulemaking, did not DATES: Accession No. ML20136A048. oppose the rule, or did not propose a Effective Dates: The provisions in this • Attention: The Public Document change to the rule, such that the rule interim final rule related to loan Room (PDR), where you may examine would be ineffective or unacceptable forgiveness and deferral periods for PPP VerDate Sep<11>2014 17:22 Jun 15, 2020 Jkt 250001 PO 00000 Frm 00002 Fmt 4700 Sfmt 4700 E:\FR\FM\16JNR1.SGM 16JNR1 Federal Register / Vol. 85, No. 116 / Tuesday, June 16, 2020 / Rules and Regulations 36309 loans are effective March 27, 2020. The pandemic. The Small Business many PPP borrowers can now apply for provision in this interim final rule Administration (SBA) received funding loan forgiveness following the end of relating to the maturity date of PPP and authority through the Act to modify their eight-week covered period. loans is effective June 5, 2020. The existing loan programs and establish a Providing borrowers and lenders with remaining provisions in this interim new loan program to assist small certainty on both loan requirements and final rule are effective June 12, 2020. businesses nationwide adversely loan forgiveness requirements following Comment Date: Comments must be impacted by the COVID–19 emergency. the enactment of the Flexibility Act will received on or before July 16, 2020. Section 1102 of the Act temporarily enhance the ability of lenders to make ADDRESSES: You may submit comments, permits SBA to guarantee 100 percent of loans and process loan forgiveness identified by number SBA–2020–0035, 7(a) loans under a new program titled applications, particularly in light of the through the Federal eRulemaking Portal: the ‘‘Paycheck Protection Program.’’ fact that most of the Flexibility Act’s http://www.regulations.gov. Follow the Section 1106 of the Act provides for provisions are retroactive to March 27, instructions for submitting comments. forgiveness of up to the full principal 2020. Specifically, small businesses that SBA will post all comments on amount of qualifying loans guaranteed have yet to apply for and receive a PPP www.regulations.gov. If you wish to under the Paycheck Protection Program. loan need to be informed of the terms submit confidential business A more detailed discussion of sections of PPP loans as soon as possible, information (CBI) as defined in the User 1102 and 1106 of the Act is found in because the last day on which a lender Notice at www.regulations.gov, please section III below. can obtain an SBA loan number for a send an email to ppp-ifr@sba.gov. On April 24, 2020, the President PPP loan is June 30, 2020. Borrowers Highlight the information that you signed the Paycheck Protection Program who already have applied for and consider to be CBI and explain why you and Health Care Enhancement Act (Pub. received a PPP loan need certainty believe SBA should hold this L. 116–139), which provided additional regarding how loan proceeds must be information as confidential. SBA will funding and authority for the PPP. On used during the covered period, as review the information and make the June 5, 2020, the President signed the amended by the Flexibility Act, so that final determination whether it will Paycheck Protection Program Flexibility they can maximize the amount of loan publish the information. Act of 2020 (Flexibility Act) (Pub. L. forgiveness. These same reasons provide 116–142), which changes key provisions good cause for SBA to dispense with the FOR FURTHER INFORMATION CONTACT: A of the Paycheck Protection Program, 30-day delayed effective date provided Call Center Representative at 833–572– including provisions relating to the in the Administrative Procedure Act. 0502, or the local SBA Field Office; the maturity of PPP loans, the deferral of Although this interim final rule is list of offices can be found at https:// PPP loan payments, and the forgiveness www.sba.gov/tools/local-assistance/ effective on or before date of filing, of PPP loans. Section 3(d) of the comments are solicited from interested districtoffices. Flexibility Act provides that the members of the public on all aspects of SUPPLEMENTARY INFORMATION: amendments relating to PPP loan the interim final rule, including section I. Background Information forgiveness and extension of the deferral III below. These comments must be period for PPP loans shall be effective submitted on or before July 16, 2020. On March 13, 2020, President Trump as if included in the CARES Act, which declared the ongoing Coronavirus The SBA will consider these comments, means that they are retroactive to March comments received on the interim final Disease 2019 (COVID–19) pandemic of 27, 2020. Section 2 of the Flexibility Act sufficient severity and magnitude to rule posted on SBA’s website April 2, provides that the amendment relating to 2020 (the First Interim Final Rule) and warrant an emergency declaration for all the extension of the maturity date for states, territories, and the District of published in the Federal Register on PPP loans shall take effect on the date Columbia. With the COVID–19 April 15, 2020, and the need for making of enactment (June 5, 2020). Under the emergency, many small businesses any revisions as a result of these Flexibility Act, the extension of the nationwide are experiencing economic comments. maturity date for PPP loans is applicable hardship as a direct result of the to PPP loans made on or after that date, III. Paycheck Protection Program— Federal, State, and local public health and lenders and borrowers may Revisions to First Interim Final Rule measures that are being taken to mutually agree to modify PPP loans (85 FR 20811) minimize the public’s exposure to the made before such date to reflect the virus. These measures, some of which Overview longer maturity. are government-mandated, have been The CARES Act was enacted to implemented nationwide and include II. Comments and Retroactive/ provide immediate assistance to the closures of restaurants, bars, and Immediate Effective Date individuals, families, and businesses gyms. In addition, based on the advice This interim final rule is effective affected by the COVID–19 emergency. of public health officials, other without advance notice and public Among the provisions contained in the measures, such as keeping a safe comment because section 1114 of the CARES Act are provisions authorizing distance from others or even stay-at- CARES Act authorizes SBA to issue SBA to temporarily guarantee loans home orders, have been implemented, regulations to implement Title I of the under a new 7(a) loan program titled the resulting in a dramatic decrease in Act without regard to notice ‘‘Paycheck Protection Program.’’ Loans economic activity as the public avoids requirements. In addition, SBA has guaranteed under the Paycheck malls, retail stores, and other determined that there is good cause for Protection Program (PPP) will be 100 businesses. dispensing with advance public notice percent guaranteed by SBA, and the full On March 27, 2020, the President and comment on the grounds that that principal amount of the loans may lotter on DSK30NT082PROD with RULES signed the Coronavirus Aid, Relief, and it would be contrary to the public qualify for loan forgiveness. The Economic Security Act (the CARES Act interest. Specifically, advance public Flexibility Act amends the CARES Act or the Act) (Pub. L. 116–136) to provide notice and comment would defeat the and amends provisions relating to loan emergency assistance and health care purpose of this interim final rule given terms and loan forgiveness. The purpose response for individuals, families, and that SBA’s authority to guarantee PPP of this interim final rule is to make businesses affected by the coronavirus loans expires on June 30, 2020, and that changes to the First Interim Final Rule, VerDate Sep<11>2014 17:22 Jun 15, 2020 Jkt 250001 PO 00000 Frm 00003 Fmt 4700 Sfmt 4700 E:\FR\FM\16JNR1.SGM 16JNR1 36310 Federal Register / Vol. 85, No. 116 / Tuesday, June 16, 2020 / Rules and Regulations posted on SBA’s website on April 2, 5 years for all PPP loans made on or that period. For example, if a borrower’s 2020, and published in the Federal after its enactment. The Administrator, PPP loan is disbursed on June 25, 2020, Register on April 15, 2020 (85 FR in consultation with the Secretary, the 24-week period ends on December 20811). The First Interim Final Rule, as determined that the date SBA assigns a 10, 2020. If the borrower does not amended by this interim final rule, loan number to the PPP loan provides submit a loan forgiveness application to should be interpreted consistent with an efficient, transparent, and auditable its lender by October 10, 2021, the the frequently asked questions (FAQs) means of determining when a PPP loan borrower must begin making payments regarding the PPP that are posted on is ‘‘made’’ that provides certainty to on or after October 10, 2021. SBA’s website 1 and the other interim lenders. While the CARES Act provides d. Loan Forgiveness final rules issued regarding the PPP.2 that a loan will have a maximum maturity of up to ten years from the date Section 3(b) of the Flexibility Act 1. Changes to the First Interim Final amended the requirements concerning the borrower applies for loan Rule forgiveness of PPP loans to reduce the forgiveness, the Administrator, in a. Covered Period for PPP Loans consultation with the Secretary, amount of PPP loan proceeds that must determined that a five-year loan term is be used for payroll costs in order to be Section 3(a) of the Flexibility Act forgivable, and the law also created a amended the definition of ‘‘covered sufficient in light of the temporary economic dislocations caused by the new exemption for borrowers to avoid a period’’ for a PPP loan from ‘‘the period reduction in loan forgiveness amount beginning on February 15, 2020 and coronavirus. Specifically, the considerable economic disruption when they have a reduction in full-time ending on June 30, 2020’’ to ‘‘the period equivalent employees. While the beginning on February 15, 2020 and caused by the coronavirus is expected to abate well before the five-year maturity Flexibility Act provides that a borrower ending on December 31, 2020.’’ shall use at least 60 percent of the PPP Therefore, Part III.2.g.iii. of the First date such that borrowers will be able to resume business operations and pay off loan for payroll costs to receive loan Interim Final Rule (85 FR 20811, 20813) forgiveness, the Administrator, in is revised by striking ‘‘June 30, 2020’’ any outstanding balances on their PPP loans. consultation with the Secretary, and replacing it with ‘‘December 31, interprets this requirement as a 2020’’. Section 3(d) of the Flexibility c. Deferral Period for PPP Loans proportional limit on nonpayroll costs Act provides that this amendment shall as a share of the borrower’s loan be effective as if included in the CARES Section 3(c) of the Flexibility Act extended the deferral period on PPP forgiveness amount, rather than as a Act, which was signed into law on threshold for receiving any loan March 27, 2020. loans. Therefore, Part III.2.n. of the First Interim Final Rule (85 FR 20811, 20813) forgiveness. This interpretation is This amendment by the Flexibility consistent with the new safe harbor in Act applies to the definition of ‘‘covered is revised to read as follows: n. When will I have to begin paying the Flexibility Act. The new safe harbor period’’ that appears in section 1102 of provides that if a borrower is unable to the CARES Act, governing loan use, principal and interest on my PPP loan? If you submit to your lender a loan rehire previously employed individuals loan eligibility, and related or similarly qualified employees, the forgiveness application within 10 requirements. It does not alter the borrower will not have its loan months after the end of your loan meaning of ‘‘covered period’’ that forgiveness amount reduced based on forgiveness covered period, you will not appears in section 1106 of the CARES the reduction in full-time equivalent have to make any payments of principal Act governing loan forgiveness, which is employees. It would be incongruous to or interest on your loan before the date addressed by a different provision of the interpret the Flexibility Act’s 60 percent on which SBA remits the loan Flexibility Act. requirement as a threshold for receiving forgiveness amount on your loan to your b. Maturity Date for PPP Loans lender (or notifies your lender that no any loan forgiveness, because in some loan forgiveness is allowed). cases it would directly conflict with the Section 2(a) of the Flexibility Act flexibility provided by the new safe amended the CARES Act to provide a Your ‘‘loan forgiveness covered period’’ is the 24-week period beginning harbor. Further, the 60 percent minimum maturity of five years for all requirement in the Flexibility Act was PPP loans made on or after the date of on the date your PPP loan is disbursed; however, if your PPP loan was made enacted against the backdrop of SBA’s enactment of the Flexibility Act. existing rules governing the PPP, which Therefore, Part III.2.j. of the First before June 5, 2020, you may elect to have your loan forgiveness covered Congress was aware of and which Interim Final Rule (85 FR 20811, 20813) provided for proportional reductions in is revised to read as follows: period be the eight-week period beginning on the date your PPP loan loan forgiveness for borrowers that used j. What will be the maturity date on less than 75% of their loan amount a PPP loan? was disbursed.3 Your lender must notify you of remittance by SBA of the loan during the eight-week covered period For loans made before June 5, 2020, for payroll costs. In addition, this the maturity is two years; however, forgiveness amount (or notify you that SBA determined that no loan interpretation of the 60 percent borrowers and lenders may mutually requirement under the Flexibility Act is agree to extend the maturity of such forgiveness is allowed) and the date your first payment is due. Interest most consistent with Congress’s purpose loans to five years. For loans made on in that legislation—namely, to increase or after June 5, the maturity is five years. continues to accrue during the deferment period. the flexibility provided to borrowers Section 2 of the Paycheck Protection related to PPP loan forgiveness. Program Flexibility Act of 2020 If you do not submit to your lender a In addition, as noted in paragraph d. (Flexibility Act) amended the CARES loan forgiveness application within 10 above, in seeking loan forgiveness, an Act to provide a minimum maturity of months after the end of your loan lotter on DSK30NT082PROD with RULES eligible borrower whose loan was made forgiveness covered period, you must before June 5, 2020 may elect to apply 1 See https://www.sba.gov/document/support-- begin paying principal and interest after the original eight-week covered period faq-lenders-borrowers. 2 See https://www.sba.gov/funding-programs/ 3 Under section 3(b)(1) of the Flexibility Act, the under the CARES Act instead of the 24- loans/coronavirus-relief-options/paycheck- loan forgiveness covered period of any borrower week covered period referenced above. protection-program. will end no later than December 31, 2020. See Flexibility Act, section 3(b)(3). VerDate Sep<11>2014 17:22 Jun 15, 2020 Jkt 250001 PO 00000 Frm 00004 Fmt 4700 Sfmt 4700 E:\FR\FM\16JNR1.SGM 16JNR1 Federal Register / Vol. 85, No. 116 / Tuesday, June 16, 2020 / Rules and Regulations 36311 SBA will be issuing revisions to its 2.e. above, Part III.2.r. of the First f. Borrower Certifications interim final rules on loan forgiveness Interim Final Rule (85 FR 20811, 20814) For consistency with the changes and loan review procedures to address is revised to read as follows: discussed in paragraphs 2.e. and f. amendments the Flexibility Act made to r. How can PPP loans be used? above, Parts III.2.t.iii., iv., and v. of the the loan forgiveness requirements. SBA First Interim Final Rule (85 FR 20811, The proceeds of a PPP loan are to be will also be issuing additional guidance 20814) are revised to read as follows: used for: on advance purchases of PPP loans, t. What certifications need to be which will include any effect of the i. payroll costs (as defined in the Act made? amendments made to the loan and in 2.f.); * * * * * forgiveness requirements. For the ii. costs related to the continuation of iii. The funds will be used to retain reasons described above, Part III.2.o. of group health care benefits during workers and maintain payroll or make the First Interim Final Rule (85 FR periods of paid sick, medical, or family mortgage interest payments, lease 20811, 20813) is revised to read as leave, and insurance premiums; payments, and utility payments; I follows: iii. mortgage interest payments (but understand that if the funds are o. Can my PPP loan be forgiven in not mortgage prepayments or principal knowingly used for unauthorized whole or in part? payments); purposes, the Federal Government may Yes. The amount of loan forgiveness iv. rent payments; hold me legally liable such as for can be up to the full principal amount v. utility payments; charges of fraud. As explained above, of the loan and any accrued interest. An not more than 40 percent of loan eligible borrower will not be responsible vi. interest payments on any other proceeds may be used for nonpayroll for any loan payment if the borrower debt obligations that were incurred costs. uses all of the loan proceeds for before February 15, 2020; and/or iv. Documentation verifying the forgivable purposes as described below vii. refinancing an SBA EIDL loan number of full-time equivalent and employee and compensation levels made between January 31, 2020 and employees on payroll as well as the are maintained or, if not, an applicable April 3, 2020. If you received an SBA dollar amounts of payroll costs, covered safe harbor applies. The actual amount EIDL loan from January 31, 2020 mortgage interest payments, covered of loan forgiveness will depend, in part, through April 3, 2020, you can apply for rent payments, and covered utilities for on the total amount of payroll costs, a PPP loan. If your EIDL loan was not the loan forgiveness covered period for payments of interest on mortgage used for payroll costs, it does not affect the loan will be provided to the lender. obligations incurred before February 15, your eligibility for a PPP loan. If your v. Loan forgiveness will be provided 2020, rent payments on leases dated EIDL loan was used for payroll costs, for the sum of documented payroll before February 15, 2020, and utility your PPP loan must be used to refinance costs, covered mortgage interest payments for service that began before your EIDL loan. Proceeds from any payments, covered rent payments, and February 15, 2020, over the loan advance up to $10,000 on the EIDL loan covered utility payments. As explained forgiveness covered period. However, to above, not more than 40 percent of the will be deducted from the loan receive full loan forgiveness, a borrower forgiven amount may be used for forgiveness amount on the PPP loan. must use at least 60 percent of the PPP nonpayroll costs. loan for payroll costs, and not more than At least 60 percent of the PPP loan 40 percent of the loan forgiveness proceeds shall be used for payroll costs. * * * * * amount may be attributable to For purposes of determining the 2. Additional Information nonpayroll costs. For example, if a percentage of use of proceeds for payroll costs, the amount of any EIDL SBA may provide further guidance, if borrower uses 59 percent of its PPP loan refinanced will be included. For needed, through SBA notices which will for payroll costs, it will not receive the purposes of loan forgiveness, however, be posted on SBA’s website at full amount of loan forgiveness it might the borrower will have to document the www.sba.gov. Questions on the otherwise be eligible to receive. Instead, proceeds used for payroll costs in order Paycheck Protection Program may be the borrower will receive partial loan to determine the amount of forgiveness. directed to the Lender Relations forgiveness, based on the requirement While the Act provides that PPP loan Specialist in the local SBA Field Office. that 60 percent of the forgiveness proceeds may be used for the purposes The local SBA Field Office may be amount must be attributable to payroll listed above and for other allowable found at https://www.sba.gov/tools/ costs. For example, if a borrower uses described in section 7(a) of the local-assistance/districtoffices. receives a $100,000 PPP loan, and during the covered period the borrower Small Business Act (15 U.S.C. 636(a)), Compliance With Executive Orders spends $54,000 (or 54 percent) of its the Administrator believes that finite 12866, 12988, 13132, 13563, and 13771, loan on payroll costs, then because the appropriations and the structure of the the Paperwork Reduction Act (44 borrower used less than 60 percent of its Act warrant a requirement that U.S.C. Ch. 35), and the Regulatory loan on payroll costs, the maximum borrowers use a substantial portion of Flexibility Act (5 U.S.C. 601–612) amount of loan forgiveness the borrower the loan proceeds for payroll costs, consistent with Congress’ overarching Executive Orders 12866, 13563, and may receive is $90,000 (with $54,000 in goal of keeping workers paid and 13771 payroll costs constituting 60 percent of the forgiveness amount and $36,000 in employed. This percentage is consistent This interim final rule is nonpayroll costs constituting 40 percent with the limitation on the forgiveness economically significant for the of the forgiveness amount). amount set forth in the Flexibility Act. purposes of Executive Orders 12866 and This limitation on use of the loan funds 13563, and is considered a major rule e. Use of PPP Loan Proceeds lotter on DSK30NT082PROD with RULES will help to ensure that the finite under the Congressional Review Act. For consistency with the amendments appropriations available for these loans SBA, however, is proceeding under the made in the Flexibility Act regarding are directed toward payroll protection, emergency provision at Executive Order the percentage of loan proceeds that as each loan that is issued depletes the 12866 Section 6(a)(3)(D) based on the must be used for payroll costs in order appropriation, regardless of whether need to move expeditiously to mitigate to be forgiven, discussed in paragraph portions of the loan are later forgiven. the current economic conditions arising VerDate Sep<11>2014 17:22 Jun 15, 2020 Jkt 250001 PO 00000 Frm 00005 Fmt 4700 Sfmt 4700 E:\FR\FM\16JNR1.SGM 16JNR1 36312 Federal Register / Vol. 85, No. 116 / Tuesday, June 16, 2020 / Rules and Regulations from the COVID–19 emergency. This regulatory flexibility analysis that meets and Economic Security Act, Pub. L. 116–136, rule’s designation under Executive the requirements of the RFA and Section 1114. Order 13771 will be informed by public publish such analysis in the Federal Jovita Carranza, comment. Register. 5 U.S.C. 603, 604. Specifically, Administrator. This rule is necessary to implement the RFA normally requires agencies to [FR Doc. 2020–12909 Filed 6–12–20; 11:15 am] Sections 1102 and 1106 of the CARES describe the impact of a rulemaking on BILLING CODE P Act and the Flexibility Act in order to small entities by providing a regulatory provide economic relief to small impact analysis. Such analysis must businesses nationwide adversely address the consideration of regulatory impacted under the COVID–19 DEPARTMENT OF TRANSPORTATION options that would lessen the economic Emergency Declaration. We anticipate effect of the rule on small entities. The Federal Aviation Administration that this rule will result in substantial RFA defines a ‘‘small entity’’ as (1) a benefits to small businesses, their proprietary firm meeting the size 14 CFR Part 39 employees, and the communities they standards of the Small Business serve. However, we lack data to estimate Administration (SBA); (2) a nonprofit [Docket No. FAA–2020–0466; Project the effects of this rule. Identifier MCAI–2020–00504–A; Amendment organization that is not dominant in its 39–21143; AD 2020–12–08] Executive Order 12988 field; or (3) a small government jurisdiction with a population of less RIN 2120–AA64 SBA has drafted this rule, to the extent practicable, in accordance with than 50,000. 5 U.S.C. 601(3)–(6). Except Airworthiness Directives; Embraer S.A. the standards set forth in section 3(a) for such small government jurisdictions, (Type Certificate Previously Held by and 3(b)(2) of Executive Order 12988, to neither State nor local governments are Empresa Brasileira de Aeronáutica minimize litigation, eliminate ‘‘small entities.’’ Similarly, for purposes S.A.) Airplanes ambiguity, and reduce burden. The rule of the RFA, individual persons are not has no preemptive effect but does have small entities. AGENCY: Federal Aviation a limited retroactive effect consistent The requirement to conduct a Administration (FAA), DOT. with section 3(d) of the Flexibility Act. regulatory impact analysis does not ACTION: Final rule; request for apply if the head of the agency ‘‘certifies comments. Executive Order 13132 that the rule will not, if promulgated, SUMMARY: The FAA is superseding SBA has determined that this rule have a significant economic impact on will not have substantial direct effects airworthiness directive (AD) 2011–20– a substantial number of small entities.’’ 01 for certain Empresa Brasileira de on the States, on the relationship 5 U.S.C. 605(b). The agency must, between the National Government and Aeronáutica S.A. (now Embraer S.A.) however, publish the certification in the Model EMB–505 airplanes. AD 2011– the States, or on the distribution of Federal Register at the time of power and responsibilities among the 20–01 required replacing the bolts that publication of the rule, ‘‘along with a attach the balance mass weights to the various layers of government. Therefore, statement providing the factual basis for SBA has determined that this rule has elevator structure. This AD requires such certification.’’ If the agency head inspections of the mass-balance weights no federalism implications warranting has not waived the requirements for a of the elevators, ailerons, and rudder preparation of a federalism assessment. regulatory flexibility analysis in (flight control surfaces) and their Paperwork Reduction Act, 44 U.S.C. accordance with the RFA’s waiver attachment parts and corrective actions Chapter 35 provision, and no other RFA exception if necessary, and revising the SBA has determined that this rule applies, the agency must prepare the airworthiness limitation section of the will modify existing recordkeeping or regulatory flexibility analysis and existing maintenance manual or reporting requirements under the publish it in the Federal Register at the instructions for continued airworthiness Paperwork Reduction Act. The time of promulgation or, if the rule is to incorporate new airworthiness amendments to the PPP made by the promulgated in response to an limitations. This AD also adds airplanes Flexibility Act and implemented in this emergency that makes timely to the applicability. This AD was interim final rule will require compliance impracticable, within 180 prompted by reports of corrosion in the conforming revisions to the PPP days of publication of the final rule. 5 mass-balance weights of the flight Borrower Application Form (SBA Form U.S.C. 604(a), 608(b). control surfaces, and a determination 2483), the PPP Lender Application Form Rules that are exempt from notice and that new airworthiness limitations are (SBA Form 2484), and the PPP Loan comment are also exempt from the RFA necessary. The FAA is issuing this AD Forgiveness Application (SBA Form requirements, including conducting a to address the unsafe condition on these 3508). SBA will submit the modified regulatory flexibility analysis, when products. forms to OMB for approval as a among other things the agency for good DATES: This AD is effective July 1, 2020. modification to the existing PPP cause finds that notice and public The Director of the Federal Register information collection. This information approved the incorporation by reference procedure are impracticable, collection is currently approved as an of a certain publication listed in this AD unnecessary, or contrary to the public emergency request under OMB Control as of July 1, 2020. interest. Small Business The FAA must receive any comments Number 3245–0407 until October 31, Administration’s Office of Advocacy 2020. on this AD by July 31, 2020. guide: How to Comply with the ADDRESSES: You may send comments, Regulatory Flexibility Act (RFA) Regulatory Flexibility Ac. Ch.1. p.9. lotter on DSK30NT082PROD with RULES using the procedures found in 14 CFR The Regulatory Flexibility Act (RFA) Accordingly, SBA is not required to 11.43 and 11.45, by any of the following generally requires that when an agency conduct a regulatory flexibility analysis. methods: issues a proposed rule, or a final rule Authority: 15 U.S.C. 636(a)(36); Paycheck • Federal eRulemaking Portal: Go to pursuant to section 553(b) of the APA or Protection Program Flexibility Act of 2020, https://www.regulations.gov. Follow the another law, the agency must prepare a Pub. L. 116–142; Coronavirus Aid, Relief, instructions for submitting comments. VerDate Sep<11>2014 17:22 Jun 15, 2020 Jkt 250001 PO 00000 Frm 00006 Fmt 4700 Sfmt 4700 E:\FR\FM\16JNR1.SGM 16JNR1